Use Reinforced Webbing Edges for:

• Crowd control barriers and sporting events wherein the public may attempt to remove the graphics.
• Long span banners across roadside or raceway access.
• High Wind areas and rough usage.
• Extra strength & anti vandal.

Frequently Asked Questions

The three (3) most common questions are:

#1 Do I add more Material Over Size because of the Hook n Loop = No Keep all your Material Over Size as per the Easy Template Maker suggestions.

#2 Does it come with both sides? No. We supply a single choice sewn onto the banner inner perimeter.

#3 Is it included all sides? YES, we insert the webbing into all four edge perimeters.

Sizes

1" inch Size = 25mm:
Order 1" for normal use attached to a fixture, wall, portable rental fence or structure.

2" inch Size = 50mm:
Order 2" for 'Air banners' where the banner needs self supporting over long spans

Colors: White Black Red Yellow Green Blue

Ideas & Usage

Choosing the Reinforced Webbing Edges for your banners (indoor or outdoor use) will give you a triple strength solution. Choose a color that best suits your graphic media print on the front and any color influences you may have.

Eyelets Grommets are machined inserted and pass through the material hem, the reinforced webbing and through the material again.

For event signage and displays you can choose this triple strength reinforced webbing inside the hem of your banners event signs and displays

Reinforced Webbing Edges are INSIDE the hem and are NOT SEEN
Reinforced Webbing Edges do not extend past the finished order size.