MATERIAL DATA SHEET www.signsbannersonline.com 
| Polamide 6 (Nylon 6) | |
|---|---|
| Width: | 1" 25mm / 2" 50mm |
| Finish: | White Black Blue Green Red Yellow |
| Weight: | 1.2mm (1/8"±) |
| Flamability: | Flame Retardant Din-4012-B1 USA NFPA 701 |
| Strength: | Burst strength: 18kg / 39 lbs |
| Recycle: | 100% Recycle. |
< See Product Page
Note: Typically used inside hem. Suited to your product/manufacturing choices via order page.
Page Link | See How others are using this product here.
Event Signage, anti vandal, added 3x horizontal strength.
Features
- Excellent quality
- Clean bright colors
- Recyclable
- Sewing capability
The number of applications for nylon is enormous; a few examples include tie wraps, woven tape, fabric hook-and-loop fasteners (e.g. trade name Velcro® tape), electrical connectors, tubing, electrical housings, fishing line, automotive oil pans, many military applications, and a multitude of fabrics.
RECYCLE: Recycled Polyamide is a synthetic fiber based on polymer waste recovery.
The term REINFORCED applies to providing 3x times the strength of normal fabric. It does not imply any other meaning.
NOTE: This is not a safety product. Low tensile Low Strength. Display fabrics use only. Do not use for securing or lifting weight bearing loads.
Storage Handling Transport
No special handling requirements. Wear PPE. No special storage requirements. Transport: US DOT Hazard Class: Not regulated. US DOT ID NUMBER: Not applicable. IATA/IMDG/RID/ADR/UN(not regulated/not classified). WHMIS (Canada) Not a controlled product: Foreign Inventory Status: AU(ACIS) CA(DSL) China(IECSC) PI(PICCS) EU(EINECS/ELINCS/NLPL) JP(ENCS) KR(KECI) NZ. Polymide is not classified as a hazardous substance.
Health Hazards
Skin-Eyes: May cause mechanical irritation. Contact with molten material may cause thermal burns. Exposure Guidelines: Protect against hazards such as contact with high speed yarn. Eyewear: Safety glasses during processing. Inhalation: Not respirable in this form. Respiratory: An approved dust respirator should be worn. Ventilation: Thermal processing requires ventialtion of fumes and vapors which may cause irritation to the nose and throat. Ingestion: Not a probable route of exposure.
Properties
Ingredient Name: Polymide 6 (Nylon 6) CAS NUMBER 25038-54-4. Material is not known to contain Toxic Chemicals. Normally Stable: Avoid exposure to open flame or temperatues exceeding recommended processing conditions. Physical State: Solid pellet in compound color. Processed State: Webbing. Odor: Characteristic waxy odor. pH: Not applicable. EC guidelines: This product is not hazardous.
Hazards
Hazardous Decomposition Products: Thermal decomposition products may include CO,hydrogen cyanide, ethylene glycol, aldehydes and other C, H, and O compounds varying in chemical structure and molecular wieghts. Hazardous Polymerization: Will not occur. Toxicological Information: Not considered to cause irritant or allergic contact dematitis. Delayed: None shown. Disposal Considerations: RCRA: No. Other Disposal Considerations: Dispose as nonhazardous waste in accordance your regulations. Toxic Substance Control Act (TSCA): Polymer is listed on the TSCA Inventory. other Toxicological Information has not been determined.
Declaration of the preparation:
- The preparation isn't classified as dangerous and it contains no hazardous material.
Hazards Identification: None reported or known to exist. FIRST AID MEASURE [Acute-Chronic None listed] Ingestion: Seek immediate medical assistance.
FIRE: Flame Retardant Din-4012-B1 USA NFPA 701. Draperies used in public spaces. Name of Product: POLYMIDE 6 Woven Tape.
Independent Testing: None: This page is general information only and the product supply line may change from time to time.
Fire Fighting FLASH POINT: Not applicable. Flame Propagation Rate: Not determined. OHSA Flammability Class: Combustible Solid. NFPA Ratings: Health-1 Fire-1 Reactivity-0. Flammable Limits In Air: NA. Fire Fighting Media: Standard Agents, Dry Chemical Foam, CO2, Water, Spray (fog). Fire Fighting Equipment: Wear full bunker including self contain breathing apparatus to avoid exposure to smoke and vapors. Unusual Fire And Explosion Hazards: NA. Physical & Chemical Properties: Melting point 220-250°C. Decomposition Temperature: >350°C. Conditions To Avoid: Temperatures above 350°C will cause decompositions in the presence of carbon monoxide, hydrogen cyanide, ammonia. Solubility In Water: Neglible. Chemical Stability: Stable. Incompatability: Incompatible or can react with strong oxidizers, bases and acids, halogenated carbon compounds.
Fibers are coated with minor quantities of finish oils. Textile processes may volatilize portions of these finishes and produce visible misting in the workplace. Ventilation is recommended to minimize exposure to such finish mists which should not exceed a concentration of 5 mg/m3 ACGIH TLV for mineral oil.
Fibres are/maybe coated with ink. Textile printing processes may volatilize portions of these finishes. The inkjet ink prepartion isn't classified as dangerous and it contains no hazardous material after curing during normal handling and operation. At tempertures between approximately 130-190°C the applied finish may evaporate or decompose. Residual solvents post 128 hours: 0.05%.
The information in this Material Data Sheet page relates only to the specific material designated and may not apply where such material is used in combination with any other material or in any process. This information is to the best of our knowledge based on accurate and reliable information, but may be subject to revision as new information becomes available. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. Each user is responsible for satisfying itself as to the suitability of such information for its own particular use; therefore additional safety precautions may be required. E&EO.